==( init log for Qmax H3 @ HERE ONLY )==

log file
Date: 30/09/2014 - 04:40:34 م
-----------------------------------------------
BO


Boot V2.7


Phase Scan in Boot Start Stage


200000


Phase Scan in Set Parameters Stage


31, 11, 15, 07, 07,

10, 24, 16, 16


[ 2 ff 2 0 ff ff ff ]

0x34 0x32 0x32

DDR2


DDR/PLL Init Done


L2 cache Init Done


Boot start


SPI Load Code done


CPUfreq 400000 DRAMSize 512



BootManager V1.7



>> Pressing key enter boot-menu......



>> Load code from SPI...



>> Check image parity...



>> Unzip Image Start....

>>

App Start...



[cyg_net_init] Init: mbinit(0x00000000)
[cyg_net_init] Init: cyg_net_init_devs(0x00000000)
Init device 'eth1'
[cyg_net_init] Init: loopattach(0x00000000)
[cyg_net_init] Init: cyg_ppp_pppattach(0x00000000)
[cyg_net_init] Init: ifinit(0x00000000)
[cyg_net_init] Init: domaininit(0x00000000)
[cyg_net_init] Init: cyg_net_add_domain(0x807ae01c)
New domain internet at 0x00000000
[cyg_net_init] Init: cyg_net_add_domain(0x807ada5c)
New domain route at 0x00000000
[cyg_net_init] Init: call_route_init(0x00000000)
[cyg_net_init] Done
[USBSerial_Init:245]: $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ $IN


nvt3g usb serial version[ver:1.01.47-nvt3g]

[USBSerial_Init:262]: $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ $OUT

init time1 interrupt

init time2 interrupt

init time3 interrupt

init time4 interrupt

init time5 interrupt


PHY 0xffff
PHY 0xffffEthernet PHY SW reset fail!
After reset PHY Control reg : 0xffff
[ver:1.01a.01-WIFI]


GSHARDWARE : 0


M-ID = Qmax MST-999


C ID = 65


HW ID = 0


Sub Model ID = 0


R-Type = 30


Fpanel Type = 8


data len = 495096


logo 1 data len = 30965


logo 2 data len = 9685


[MMI] vid support enDecType[0xc]
[MMI] vid support enDecType[0xd]
[MMI] vid support enDecType[0xe]
[MMI] vid support enDecType[0xf]
[MMI] vid support enDecType[0x10]
[MMI] vid support enDecType[0xc]
[MMI] vid support enDecType[0xd]
[MMI] vid support enDecType[0xe]
[MMI] vid support enDecType[0xf]
[MMI] vid support enDecType[0x10]
[MMI] vid support enDecType[0x0]
[MMI] vid support enDecType[0x1]
[MMI] vid support enDecType[0x2]
[MMI] vid support enDecType[0x3]
[MMI] vid support enDecType[0x4]
[MMI] vid support enDecType[0x5]
[MMI] vid support enDecType[0x6]
[MMI] vid support enDecType[0x7]
[MMI] vid support enDecType[0x0]
[MMI] vid support enDecType[0x1]
[MMI] vid support enDecType[0x2]
[MMI] vid support enDecType[0x3]
[MMI] vid support enDecType[0x4]
[MMI] vid support enDecType[0x5]
[MMI] vid support enDecType[0x6]
[MMI] vid support enDecType[0x7]

SPIFlash u32RD_Value u32RD_Value=80873bd


SPIFlash u8Status u8Status=8



-----------------------------------------------
Date: 30/09/2014 - 04:41:20 م
End log file