معلومات العضو
۩۞۩ المدير العام ۩۞۩i
معلومات إضافية الجنس : 
معدل النشاط : 32622
رقم العضوية : (2)
تاريخ التسجيل : 31/08/2010
الموقع : دريم سات
عدد المساهمات : 14078
الدولة : 
الابراج : 
العمر : 47
 دريم سات : : بوابة الانترنت الرقميةاشترك الان كل باقات العالم على سيرفر دريم سات باقات رياضية اتش دي افلام  للاستعلام الضغط هنا معلومات الاتصال  | #1 موضوع: ==( init log for Qmax H3 @ HERE ONLY )==  الأربعاء 01 أكتوبر 2014, 2:11 pm | |
| log file Date: 30/09/2014 - 04:40:34 م ----------------------------------------------- BO [30;43mBoot V2.7[0m Phase Scan in Boot Start Stage 200000 Phase Scan in Set Parameters Stage 31, 11, 15, 07, 07, 10, 24, 16, 16 [ 2 ff 2 0 ff ff ff ] 0x34 0x32 0x32 DDR2 DDR/PLL Init Done L2 cache Init Done Boot start SPI Load Code done CPUfreq 400000 DRAMSize 512 [30;43mBootManager V1.7[0m >> Pressing key enter boot-menu......
>> Load code from SPI...
>> Check image parity...
>> Unzip Image Start....
>>
App Start...
[cyg_net_init] Init: mbinit(0x00000000)
[cyg_net_init] Init: cyg_net_init_devs(0x00000000)
Init device 'eth1'
[cyg_net_init] Init: loopattach(0x00000000)
[cyg_net_init] Init: cyg_ppp_pppattach(0x00000000)
[cyg_net_init] Init: ifinit(0x00000000)
[cyg_net_init] Init: domaininit(0x00000000)
[cyg_net_init] Init: cyg_net_add_domain(0x807ae01c)
New domain internet at 0x00000000
[cyg_net_init] Init: cyg_net_add_domain(0x807ada5c)
New domain route at 0x00000000
[cyg_net_init] Init: call_route_init(0x00000000)
[cyg_net_init] Done
[USBSerial_Init:245]: $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ $IN
nvt3g usb serial version[ver:1.01.47-nvt3g]
[USBSerial_Init:262]: $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ $OUT
init time1 interrupt
init time2 interrupt
init time3 interrupt
init time4 interrupt
init time5 interrupt
PHY 0xffff
PHY 0xffffEthernet PHY SW reset fail!
After reset PHY Control reg : 0xffff
[ver:1.01a.01-WIFI]
GSHARDWARE : 0
M-ID = Qmax MST-999
C ID = 65
HW ID = 0
Sub Model ID = 0
R-Type = 30
Fpanel Type = 8
data len = 495096
logo 1 data len = 30965
logo 2 data len = 9685
[MMI] vid support enDecType[0xc]
[MMI] vid support enDecType[0xd]
[MMI] vid support enDecType[0xe]
[MMI] vid support enDecType[0xf]
[MMI] vid support enDecType[0x10]
[MMI] vid support enDecType[0xc]
[MMI] vid support enDecType[0xd]
[MMI] vid support enDecType[0xe]
[MMI] vid support enDecType[0xf]
[MMI] vid support enDecType[0x10]
[MMI] vid support enDecType[0x0]
[MMI] vid support enDecType[0x1]
[MMI] vid support enDecType[0x2]
[MMI] vid support enDecType[0x3]
[MMI] vid support enDecType[0x4]
[MMI] vid support enDecType[0x5]
[MMI] vid support enDecType[0x6]
[MMI] vid support enDecType[0x7]
[MMI] vid support enDecType[0x0]
[MMI] vid support enDecType[0x1]
[MMI] vid support enDecType[0x2]
[MMI] vid support enDecType[0x3]
[MMI] vid support enDecType[0x4]
[MMI] vid support enDecType[0x5]
[MMI] vid support enDecType[0x6]
[MMI] vid support enDecType[0x7]
SPIFlash u32RD_Value u32RD_Value=80873bd
SPIFlash u8Status u8Status=8
-----------------------------------------------
Date: 30/09/2014 - 04:41:20 م
End log file
المصدر:منتديات دريم سات الفضائيه - http://ahmed2010.dahek.net
 |
|
تعليمات-المشاركة
